MIK-825-J Signal Calibrator 0.075% high accuracy

MIK-825-J Signal Calibrator 0.075% high accuracy Featured Image
Loading...
  • MIK-825-J Signal Calibrator 0.075% high accuracy
  • MIK-825-J Signal Calibrator 0.075% high accuracy
  • MIK-825-J Signal Calibrator 0.075% high accuracy
  • MIK-825-J Signal Calibrator 0.075% high accuracy

Short Description:

0.075% Accuracy signal generator has a multiple signal Output and measurement including voltage, current and thermoelectric couple with LCD screen and silicone keypad, simple operation, longer standby time, higher accuracy and programmable output. It’s widely used in LAB Industrial field, PLC Process Instrument, Electric value and other area’s debugging. Features DC Voltageand resistance signal measurementsourceVibration: Random, 2g, 5 to 500HzPower requirement:4 AA Ni-MH, Ni-Cd batteriesSize:215mm×109mm×44.5mmWeight:About 500g


Product Detail

Product Tags

  • Specification
General Specifications Operating temperature -10℃~55℃
Storage temperature -20℃~70℃
Relative Humidity (%RH operating without condensation) 90%(10℃~30℃)
75%(30℃~40℃)
45%(40℃~50℃)
35%(50℃~55℃)
Uncontrolled<10℃
EMC EN55022, EN55024
Vibration Random, 2g, 5 to 500Hz
Concussion 30g, 11ms, half sine bow wave
Power requirement 4 AA Ni-MH, Ni-Cd batteries
Size 215mm×109mm×44.5mm
Weight About 500g
 DC Voltage  Range Accuracy
 Measurement  (0~100)mVDC(Upper display)  ±0.02%
 (0~30)VDC(Upper display)  ±0.02%
 (0~100)mVDC(Lower display)  ±0.02%
 (0~20)VDC(Lower display)  ±0.02%
 Source  (0~100)mVDC  ±0.02%
 (0~10)VDC  ±0.02%
Resistance Range Accuracy
4-wire 2-, 3-wire
Accuracy Accuracy
Measurement (0~400)Ω ±0.1Ω ±0.15Ω
(0.4~1.5)kΩ ±0.5Ω ±1.0Ω
(1.5~3.2)kΩ ±1.0Ω ±1.5Ω
Excitation Current:0.5mA

Clear of resistance before measuring according to ‘10.4 Clear of Resistance and RTDs’.

*3-wire: Assumes matched leads with a total resistance not exceeding 100Ω.

Resolution (0~1000)Ω:  0.01Ω;

(1.0~3.2)kΩ: 0.1Ω.

  • Advantages

· Two separate channels display.

the upper display shows measure parameters ;

the lower one shows measure or source parameters;

· Counting pulse function

· Calibration functions

· Auto ramping and auto stepping

· Manual and automatic cold junction compensating

· Clear function

· Temperature unit switching

· Auto flashing jacks

· Backlight LCD

· Battery gauge


  • Previous:
  • Next:

  • Write your message here and send it to us
    TOP